Establish a connection to the device that you want to link via Ethernet/IP.
In this example, a Wago controller (Ethernet/IP adapter) is used again.
The required steps are listed in this FAQ article:
Connecting to a WAGO controller via Ethernet/IP (IP scanner)
Your project should look like this:
Adapt the POU PLC_PRG as follows:
Declaration
VAR xSet : BOOL; abyNewIp : ARRAY [0..3] OF BYTE := [192, 168, 99, 139]; // = wrong IpAddr !! itfEthIpRmAdapter : IoDrvEthernetIP.IRemoteAdapter2; END_VAR
Implementation
IF xSet Then xSet := FALSE; itfEthIpRmAdapter := WAGO_750_352020_000_Ethernet_STD; // must be the exact name of the tree node itfEthIpRmAdapter.IPAddress := abyNewIp; END_IF
Download the modified project to the controller.