The MRP (media redundancy protocol) is a data network protocol that allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol.
Source: profinet.com - PROFINET SystemDescription
The MRP is more related to the slaves (and used switches).
→ make sure that the Profinet Slave does support this option!
How to:
- Add all the slaves to the PN-Controller
- Open the PN-Controller and open the Tab 'Topology'.
- Configure the connected ports, so that a ring topology is set.
- Open the TAB Media Redundancy, and set the MRP configuration for the slaves / controller
See also....
- Our Codesys Online Help (OLH) on Media Redundancy in general, and Controller, Media Redundancy in particular.