...
- Create a "Standard project" and select CODESYS Control Win V3 as the device.
- Define the target system by means of the Network scan.
Insert an Ethernet adapter in the device tree and specify the interface to be used.
Note If a target system is not defined yet, then the error message "Gateway not configured" is displayed.
- Insert a Modbus TCP Master below the Ethernet adapter in the device tree.
Insert a Modbus TCP Slave below the Modbus TCP Master in the device tree.
Info Pay attention that the address is the the same as for the Modbus Slave Device.
...
| Note |
|---|
Resetting to an invalid IP address is not possible. |
...