Info |
---|
Depending on the runtime, the configuration file is located in the following place: Location of the configuration file |
All devices with a particular prefix available
[SysCom]
Linux.Devicefile=/dev/ttyUSB
;with this setting, ttyUSB0 will be available in CODESYS IDE as COM1, ttyUSB1 will be available in CODESYS IDE as COM2 and so on
Alternatively make a selection of devices available
[SysCom]
Linux.Devicefile.1=/dev/ttyUSB0
Linux.Devicefile.2=/dev/ttyAMA1
Linux.Devicefile.4=/dev/serial
;with this setting, ttyUSB0 will be available as COM1, ttyAMA1 as COM2, and /dev/serial as COM4