...
- Create a standard project and select CODESYS Control for PFC200/PFC100 SL as the device:
Establish a connection to the device.
To do this, open the device dialog by double-clicking the device in the tree:
Open the dialog by clicking the Scan network button. All detected devices of the type are listed:
Select the corresponding device by double-clicking it.Note
The last two characters correspond to the last part of the IP address (hexadecimal).
CODESYS establishes a connection to the device and reads the device Information:Now login to the device by clicking Online/Login. It is not necessary to start the application.
Open the scan dialog of the K-bus from the context menu.
After a short time, all detected adapters are listed:There may be adapters with special subtypes that cannot be resolved.
In these cases, you can click the ellipsis button to open another dialog where the adapter can be specified:
Now all adapters can be added to the project by clicking the Copy all devices to project button.Logout to the device by clicking Online/Logout.